All-Weather Picatinny Rail .45-70 Side Gate

All-Weather Picatinny Rail .45-70 Side Gate

The all-weather picatinny rail .45-70 side gate is a precision-engineered accessory designed for firearms enthusiasts who demand reliability and versatility in all conditions. Crafted from high-grade materials, this Picatinny rail offers robust durability, ensuring optimal performance in various weather environments, from extreme cold to scorching heat.

The side gate design enhances ease of use, allowing for quick and efficient loading, even when the rail is fully equipped with optics or other accessories .all-weather picatinny rail .45-70 side gate is lightweight yet sturdy construction minimizes added weight while maintaining structural integrity, making it ideal for both tactical and hunting applications.

UPC 619835100160
Caliber 45-70
Action LEVER ACTION
Capacity 4 ROUNDS
Barrel Length 18.43 BARREL
Weight 7.1 LBS.
Finish BLACK
Frame Material HARDWOOD
Receiver Material STEEL

Tools Required:

• Tort or Allen wrench (as specified by your rail’s mounting screws)
• Thread locker (optional, for extra security)
• Cleaning cloth

 1: Ensure Safety

1. Unload the Firearm: Before beginning the installation, ensure the firearm is completely unloaded. Remove any ammunition from the chamber and magazine.
2. Double-check Safety: Engage the safety mechanism and visually inspect the firearm to confirm it is safe to handle.

 2: Prepare the Firearm

1. Clean the Mounting Surface: Use a cleaning cloth to wipe down the top of the receiver where the Picatinny rail will be mount up. Remove any dirt, oil, or debris to ensure a secure fit.

3: Align the Rail

1. Position the Rail: Place the Picatinny rail on the top of the receiver, aligning the pre-drilled holes in the rail with the corresponding holes in the firearm’s receiver.
2. Check Alignment: Ensure the rail is properly center and align with the bore of the barrel. This is crucial for maintaining accuracy when using mounted optics.

4: Install the Screws

1. Insert Screws: Begin inserting the mounting screws through the rail and into the receiver. Start with one screw at a time to keep the rail aligned.
2. Tighten Evenly: Using the appropriate Torx or Allen wrench, tighten each screw in a crisscross pattern. This ensures even pressure distribution across the rail. Tighten until the rail is securely attach but be careful not to overtighten, as this can strip the threads.

 5: Secure the Installation

1. Apply Thread Locker (Optional): For added security, you can apply a small amount of thread locker to the screws before final tightening. This helps prevent screws from loosening under recoil.
2. Final Tightening: After all screws are in place and align, give each one a final snug twist to ensure the rail is firmly mount up.